1 / 3
picotouch slidercase
Order a print of this model
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
A simple protective enclosure for the PicoTouch USB MIDI / HID controller board.
- Rating
- 0 / 5
- Likes
- 9
- Downloads
- 47
- Makes
- 0
- Views
- 562
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Music
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
This is a protective case for the PicoTouch USB MIDI/HID controller, that still allows complete access to all 23 capacitive touch pads. The result is still very thin (about 6mm) and helps prevent false triggers or bad calibration if touching the back on power up.
Prints in two pieces, no supports required, 0.2mm layer height. Snap the top piece around the PicoTouch board, then slide the combo into the bottom piece. A third “picocap” can be printed and glued to the top piece to protect the Pico, if desired.