1 / 1
Square Peg and Hole Fitment Test
Order a print of this model
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
A test print to help you figure out how much clearance you need for two printed parts to fit into each other. The main…
- Rating
- 0 / 5
- Likes
- 4
- Downloads
- 55
- Makes
- 1
- Views
- 291
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Other Ideas
- License
- Creative Commons — Attribution
A test print to help you figure out how much clearance you need for two printed parts to fit into each other.
The main peg is a 5mm x 5mm cube. The peg board has holes of the following dimensions:
4.8mm x 4.8mm
4.9mm x 4.9mm
…
5.8mm x 5.8mm
In my print, the 5.1mm x 5.1mm slot ( 0.05mm clearance per side) gave a good and very tight fit - perhaps for permanent connections. The 5.2mm x 5.2mm square (0.1mm clearance per side) gave a good generally-useful fit.
Category: Other