Dual Lamp - Hue Light Bulbs E27
We calculate the final price from your selected file. You review and accept it before payment.
Estimated printing price per file
€0.86 – €1.05 net (excluding VAT)
For file: Base_0.6n_0.4mm_PLA_MINI_37m.gcode
This is an estimate for one file. You’ll confirm the exact price before ordering.
File and estimate settings
File used for this estimate
Average indicative estimate: €0.95 excluding VAT (range midpoint).
- Weight reported by the author
- 19 g
- Print time reported by the author
- 36.6 min
- Source material
- PLA
- Estimate material
- PLA
- Estimate printer
- Bambu Lab P1S - 0.4 nozzle
- Estimate process
- 0.20mm Standard
Indicative estimate for the selected file only, based on the author’s weight and print time. File variants are not added together. The final price is calculated after file analysis.
Saved on this device.
Lamp for two Philipps Hue bulbs.
- Rating
- 0 / 5
- Likes
- 22
- Downloads
- 55
- Makes
- 0
- Views
- 946
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Home Decor
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
Lamp suitable for two Philipps Hue bulbs (E27, 1100 lm).
Required are two E27 sockets like these ones. Diameter should be between 58 and 62 mm.
Printing information
Layer height: 0.40/0.20mm (0.6/0.4 nozzle)
Infill:
Base: Gyroid 10%
Mount: Gyroid 15%
Shield: Support Cubic 5%
Support: none
With the shields I have considered own support in the design. You have to remove it with a sharp knife.
Assembly information
Safety first!
The electrical installation in the house must be carried out by a professional. Anyone who works on the electrical networks should know what they are doing. Otherwise, if the work is not done properly, there is a risk that you can get a fatal electric shock.
I. Attach power cables to the E27 sockets.
II. Screw the E27 sockets onto the two bases.
III. Screw the two bases together.
IV. Attach the mount to the wall.
V. Slide the bases into the mount and secure them with two screws (top and bottom).
VI. Insert the two shields into the bases. Turn them slightly to lock them in place. Finally, screw in the two bulbs at the top and bottom. Enjoy!
I am looking forward to your Makes! :-)
If you like this model, feel free to check out my others here.
And maybe you would like to support me with a small donation. Feel free to use the support button on the top right of this page. I myself donate one or two Euros to each designer for an interesting model that is worth five stars to me.
The following filament was used in the pictures above:
- Extrudr PLA White
- 3DJake PLA Orange