Fan shroud for i3S R5 for E3D Volcano
We calculate the final price from your selected file. You review and accept it before payment.
Preliminary estimate for PETG
€1.35 – €1.65 net (excluding VAT)
For file: fan-shroud-r5-volcano-b_015mm_petg_mk3s_1h57m.gcode
This is an estimate for one file. You’ll confirm the exact price before ordering.
File and estimate settings
File used for this estimate
Average indicative estimate: €1.50 excluding VAT (range midpoint).
- Weight reported by the author
- 10 g
- Print time reported by the author
- 1.95 hr
- Source material
- PET
- Estimate material
- PETG
- Estimate printer
- Bambu Lab P1S - 0.4 nozzle
- Estimate process
- 0.20mm Standard
Indicative estimate for the selected file only, based on the author’s weight and print time. File variants are not added together. The final price is calculated after file analysis.
Saved on this device.
This is a reworked R5 Fan shroud for the e3d Volcano Hot end.
- Rating
- 0 / 5
- Likes
- 1
- Downloads
- 41
- Makes
- 0
- Views
- 434
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Other Printer Parts & Upgrades
- License
- Creative Commons — Attribution — Noncommercial
This is a reworked R5 Fan shroud for the e3d Volcano Hot end.
It is the only part you actually need to change a standard i3S hotend for a Volcano Hotend from E3D.
note the PINDA holder and rest for stability.
This has high level blowers to cool the top of the hotend, as well as the more usual part cooling holes.
Print instructions
The holes are pretty small so it's best to print on "0.15mm QUALITY" using Prusa slicer
Because it's near the hotend, use a material = to or better than your printing material, I use PET-G and print this with PET-G.
I've used a 15% infill but the big thing is this:
USE a brim and place this near the centre of the plate or the arms may peel away from the plate.