Filament Guide - Left Oriented
We calculate the final price from your selected file. You review and accept it before payment.
Preliminary estimate for PETG
€1.02 – €1.24 net (excluding VAT)
For file: filament-guide-left_PETG_v6_0.2mm_PETG_MK3S_1h22m.gcode
This is an estimate for one file. You’ll confirm the exact price before ordering.
File and estimate settings
File used for this estimate
Average indicative estimate: €1.13 excluding VAT (range midpoint).
- Weight reported by the author
- 10 g
- Print time reported by the author
- 1.36 hr
- Source material
- PET
- Estimate material
- PETG
- Estimate printer
- Bambu Lab P1S - 0.4 nozzle
- Estimate process
- 0.20mm Standard
Indicative estimate for the selected file only, based on the author’s weight and print time. File variants are not added together. The final price is calculated after file analysis.
Saved on this device.
This is left-oriented version of the Filament Guide by GerryPB for two-spool holders
- Rating
- 0 / 5
- Likes
- 0
- Downloads
- 20
- Makes
- 1
- Views
- 118
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Accessories
- License
- Creative Commons — Attribution
This is left-oriented version of the Filament Guide by GerryPB to use with two-spool holders, like the one which comes with the Prusa i3 MK3S+.
It is not a mirror version of the original, but an updated model, using the original Fusion 360 model as a base.
The images show the left-oriented (this model, in black) and the right-oriented (the original, in orange) filament guides.
Print Settings
Printer: Prusa i3 MK3S+
Rafts: No
Supports: No
Resolution: 0.2
Infill: 25%
Infill type: Cubic (not required, I used Cubic infill to be similar to the original)
Filament: PETG
Printed in: Prusament Jet Black PETG
Notes:
Printed in PETG, but PLA works as well - I printed the original in PLA and used it until I printed the two guides shown in the images.
The Fusion 360 model is included if anyone wants to make changes.
Update 2023-06-27: Added .gcode file