1 / 5
Nippers
Order a print of this model
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Nippers with interchangeable blades.
- Rating
- 0 / 5
- Likes
- 6
- Downloads
- 35
- Makes
- 0
- Views
- 231
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Tools
- License
- Creative Commons — Attribution
Fast and easy printed nippers with interchangeable 9 mm blades.
It cuts through PETG, PTFE, nylon monofilament and similar materials with ease.
BE VERY CAREFUL WITH BLADE INSTALLATION!
Using pliers, carefully break off a piece of two jointed sections from the 9 mm blade.
Carefully slide the blade from the side, half way by hand, then USING THE SIDE OF THE PLIERS, push the blade from the side into position. Level the blade if needed, then firmly press nippers together to push the blade in place.
print settings: 0.30mm DRAFT
filament: PLA (tested on Prusament)
15% gyroid infill