Poker Chips Record Adapter and Box
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
45 record adapters in the style of poker chips. Includes a storage box that holds 20+ chips.
- Rating
- 5 / 5
- Likes
- 14
- Downloads
- 58
- Makes
- 1
- Views
- 624
- Reviews
- 1
Updated at source:
Model information
- Source
- Printables
- Category
- Music
- License
- Creative Commons — Attribution
This is a very simple print for most printers. The chips have a flex side that bends in to allow them to be inserted into records. The box features a print-in-place hinge, a closing mechanism, and a rack to slide chips in. You must be able to clear a 0.5mm gap for the box.
Print Settings: (I use a Flashforge Adventurer 3 pro)
Adapter Chip: 25-35 mins each
Print so that the poker suits are facing upwards.
- Layer Height: 0.18mm - 0.20mm
- Print Speed: 40mm/s - 60mm/s
- 2 Shells
- 0% infill
- NO SUPPORTS
- Raft not recommended
- Small brim suggested
Storage Box: 4-6 hrs
Print as shown in the CAD photos. There are small in-built supports on one side of the hinge. Box must stand up the long way and be oriented such that these supports are on the bottom. Supports needed to support the bottom part of the hinge.
- Layer Height: 0.20mm - 0.25mm
- Print Speed: 60mm/s
- 2 Shells
- 60% infill
- SUPPORTS NEEDED ON THE BOTTOM HINGE CAP
- Raft and Brims are optional