1 / 3
sg90 servo adapter for "red mini wing"
Order a print of this model
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
I modified this wing portion to allow the use of tower pro sg90 micro servo in Wersy red mini wing
- Rating
- 0 / 5
- Likes
- 9
- Downloads
- 128
- Makes
- 0
- Views
- 949
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- RC & Robotics
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
I wanted to use the servomotors i had at home, and not to buy expensive or specific ones.
The model here is the right part, you can use the symmetry function in your slicer for the left one
It respects the OC print parameters, with for the wing: 3 bottom layers, spiral vase mode, layer height =0,3mm, width =0.5 mm, NO infill
and for the servomotor holder: 3 bottom layers, height =0,3mm, width =0.5 mm, 15 percent infill
printed with anycubic PLA on a Prusa MINI+
Have fun!