Rifle Stand/Holder/WallMount
We calculate the final price from your selected file. You review and accept it before payment.
Estimated printing price per file
€0.99 – €1.21 net (excluding VAT)
For file: Gun_holder 01_NUT_0.25mm_PLA_MINI_1h3m.gcode
This is an estimate for one file. You’ll confirm the exact price before ordering.
File and estimate settings
File used for this estimate
Average indicative estimate: €1.10 excluding VAT (range midpoint).
- Weight reported by the author
- 15 g
- Print time reported by the author
- 1.04 hr
- Source material
- PLA
- Estimate material
- PLA
- Estimate printer
- Bambu Lab P1S - 0.4 nozzle
- Estimate process
- 0.20mm Standard
Indicative estimate for the selected file only, based on the author’s weight and print time. File variants are not added together. The final price is calculated after file analysis.
Saved on this device.
Držák dlouhé zbraně na pevnou podložku, případně k montáži na zeď.
- Rating
- 5 / 5
- Likes
- 98
- Downloads
- 733
- Makes
- 3
- Views
- 3,869
- Reviews
- 3
Updated at source:
Model information
- Source
- Printables
- Category
- Other House Equipment
- License
- Creative Commons — Attribution — Share Alike
Print settings:
material PLA/PETG
no supports
0,25 layer,
infill 10%/15%
Aurapol natural filament PLA
Na propojení třeba 2ks trubička nebo závitová tyč, nejlépe nerez, 10mm průměr, se závity na koncích(45mm) a 8ks matice M10.
Propojení vidlice a držáku 2x šroub M8x30 a 2x matice M8
Vnitřní plochy a spodní stranu doporučuji podlepit páskou s tenkou vrstvou filcu nebo pěnou.