42 - Version20
We calculate the final price from your selected file. You review and accept it before payment.
Estimated printing price per file
€0.22 – €0.27 net (excluding VAT)
For file: 42ring_02mm_pla_mk3s_21m.gcode
This is an estimate for one file. You’ll confirm the exact price before ordering.
File and estimate settings
File used for this estimate
Average indicative estimate: €0.25 excluding VAT (range midpoint).
- Weight reported by the author
- 1 g
- Print time reported by the author
- 21 min
- Source material
- PLA
- Estimate material
- PLA
- Estimate printer
- Bambu Lab P1S - 0.4 nozzle
- Estimate process
- 0.20mm Standard
Indicative estimate for the selected file only, based on the author’s weight and print time. File variants are not added together. The final price is calculated after file analysis.
Saved on this device.
The Answer. Also, just having fun trying out a some 3D CAD and printing ideas. More versions on the way.
- Rating
- 0 / 5
- Likes
- 3
- Downloads
- 26
- Makes
- 0
- Views
- 185
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Other Art & Designs
- License
- Creative Commons — Public Domain
The Answer.
Also, just having fun trying out a some 3D CAD and printing ideas. More versions on the way.
This one : Answer Ring
OnShape 3D CAD files :
Print instructions
Print in PLA using the 3mf file provided. Might work a bit better without a brim, but I didn't want to risk it.
This is a tricky one to print as there are a lot of small overhangs and bridges. Even if you don't use the 3mf file, I suggest you take a look at it for all of the special settings I used.
This would probably work better with a smaller diameter nozzle (I used the "standard" 0.4mm). Might be an interesting experiment to try some time.