1 / 5
Inter-Tech 4U-4408 Disk fanshroud
Order a print of this model
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
This is a disk fanshroud that can be installed behind the harddisks in the Inter-Tech 4U-4408 case.
- Rating
- 4 / 5
- Likes
- 10
- Downloads
- 126
- Makes
- 1
- Views
- 1,020
- Reviews
- 1
Updated at source:
Model information
- Source
- Printables
- Category
- Computers
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
This is a disk fanshroud that can be installed behind the harddisks in the Inter-Tech 4U-4408 case. Since the case is pretty compact I had to make some compromises. Also, It is possible it will not fit for you if you have, for example, a dual socket board.
Some tips:
- Use material that is heat resistant.
- You need two pieces. Mirror this model to get the other piece.
- Fits 2x80mm fan per piece.
- Cut away the little latch on the side to fit your cables.
- Use some double sided tape to stick it to the bottom.
- You will have to drill 2 holes in your case. One on each side.
- Install one part at a time or else you will probably never get it in.
- Check pictures for some hints.
Print setting are pretty default. 0,4 or 0,6 nozzle, 0.2 layer and no support needed.