Wizard Wand / Wizard Staff
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
A Wizard Wand with a crystal on top.
- Rating
- 0 / 5
- Likes
- 6
- Downloads
- 43
- Makes
- 0
- Views
- 674
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Other Costume Accessories
- License
- Creative Commons — Attribution — Share Alike
A Wizard Wand / Wizard Staff as wanted by my son. Consisting of three easy to print parts, just put them together and add some glue.
For the “crystal” part I printed it in upright position, using a big raft. The same for the wand part, I used a big raft on the bottom and it printed perfectly fine. The wand may be too large for some smaller printers, I added the FreeCad File and you can change that or you should also be able to just scale it down along the z-axis in your slicer.
Note that the diameters are designed to have not a tight fit, it should be loose after joining the parts – the glue will be necessary. If you want tighter fit/different dimensions, it should be easy editable with the added FreeCAD files.