1 / 5
Voron 1.8/Trident/2.4 HEPA Filter Exhaust [Remixed fitment with 3 filament input holes] — image 1
1 / 5

Voron 1.8/Trident/2.4 HEPA Filter Exhaust [Remixed fitment with 3 filament input holes]

Order a print of this model

We calculate the final price from your selected file. You review and accept it before payment.

Saved on this device.

Custom HEPA filter exhaust for Voron CoreX/Y printers [Remixed fitment with 3 filament input holes]

Rating
0 / 5
Likes
21
Downloads
90
Makes
0
Views
1,760
Reviews
0

Updated at source:

Model information

License
Creative Commons — Attribution — Share Alike

This is a remix of these two excellent designs:

This model only includes the two new/modified parts:

  • Remixed fitment that includes 3 filament input holes (one on the top, and one on each side) for increased flexibility. Each hole can fit a PC4-M10 bowden connector.
  • A plug to close the input holes you don't use. Print one for each unused hole.

I've cut some carbon filter fabric and fitted it behind the HEPA filter to help further contain toxic fumes. I've also removed the rubber corner pads from the Noctua fan to improve the seal.

I've also followed this guide to set things up with Klipper and my Octopus board: https://www.nicksherlock.com/2022/01/driving-a-4-pin-computer-pwm-fan-on-the-btt-octopus-using-klipper/

Here are the items I've used (affiliate links):

If you like what I'm doing…

…consider buying me a ☕ on Ko-Fi.