Single-use eye drops stand
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
A simple stand for a single-use eye drops. Keep a single-use eye drops from your ophthalmologist straight up.
- Rating
- 5 / 5
- Likes
- 11
- Downloads
- 85
- Makes
- 1
- Views
- 558
- Reviews
- 1
Updated at source:
Model information
- Source
- Printables
- Category
- Bathroom
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
My ophthalmologist gave me a single-use eye drops from Refresh Optive Mega-3. This eye drop has enough to use 3-4 times and the lid can be pushed back to keep it closed. The only problem is how you can keep it standing without spilling out the liquid.
This is a simple design which simply fits the bottom of the container.
The holder part is 12.6mm (W) x 3.4mm (D) x 10mm (H). Any eye drops with the similar size other than Refresh should work.
Printing
- Layer height = I used 0.2mm both 0.3mm. Both works just fine. Gcode files has 0.2mm layer height.
- Filament = PLA, PETG any other preferred filament should work.
- Infill = 10-15% should be fine. I used Rectilinear.
Disclaimer
I am not a medical specialist, I made this just for my own purpose and sharing this in case you are looking for something similar. Please read and follow the instructions of your eye drops and get consultation from your eye care provider for any concerns or questions.