Resin printer fume extraction bolt-through magnetic coupler
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
This is a modification for resin printers that allows for fume extraction and to exhaust any fumes outside.
- Rating
- 0 / 5
- Likes
- 20
- Downloads
- 71
- Makes
- 1
- Views
- 903
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Accessories
- License
- Creative Commons — Attribution
This modification is intended for 3D resin printers (or curing stations, or any other enclosure in which undesirable fumes are produced), and provides a magnetic coupler for the furfoxsake's magnetic dust extraction coupler. In my setup, printers and other devices are connected to a low-CFM inline fan you can find on amazon, which creates a very sslight negative pressure and vents any fumes outside; see my fume extraction setup for details.
This adapter requires 6x bolts of the appropriate length (depending on the thickness of the material you are attaching it to, 6 heat-set inserts, and 6x 6x3mm magnets for mating with the hose coupler (make sure you pay attention to the polarity!), and some super glue for the magnets.
I made a 55mm hole in the top of my Anycubic Mono X 6K by marking the inside of the ring, then drilling a series of small holes on the line, and a small metal blade to connect the drilled holes and cut out the hole.
Pair this with a cap in order to keep dust out of your printer.
Printed in PETG on a MK3S.