Track saw jig for waste side cuts
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Easily place guide rails with additional spacing of your saw blade kerf.
- Rating
- 0 / 5
- Likes
- 8
- Downloads
- 47
- Makes
- 0
- Views
- 789
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Tools
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
Sometimes you may need to place the guide rail on the waste side of your workpiece. For accurate dimensions, the splinter guard needs to be placed at additional distance to your marking, equal to your saw blade kerf.
Instead of calculating the new dimension and making another mark, you can use this jig to add the required distance. Place it such that the mark appears in the window. Remove before cutting.
For easiest rail placement, I recommend to use 2 jigs, one at each side.
The spacer in the middle is 1.8mm wide, matching the newer Festool thin kerf blades.