Snap-on Bag Hanger for USM Haller Table
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Easy-to-print, heavy-duty snap-fit bag hanger for USM Haller tables.
- Rating
- 0 / 5
- Likes
- 6
- Downloads
- 54
- Makes
- 1
- Views
- 850
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Office
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
This bag hanger should fit most USM Haller tables with a snap-action connection:
The design is intended to work without any additional connection elements: the attachement point of the payload, i.e. the bag, is positioned as to not create a significant moment of tilt. The stiffness has been optimized to transmit the forces reliably onto the table plate. Structural weaknesses have been reduced to a minimum where possible.
Recommended print settings for PLA:
- Layer height: 0.2 mm
- Wall line count: minimum 3
- Infill density: 30-40 %
- No supports needed
Update 2. February 2024:
Another STL file (_v3) was added with an improved design especially for (heavier) backpacks. This design is less agressive on the bag handle as it redistributes the weight over a larger surface. This should prevent damage to more delicate textiles, leathers etc.