1 / 3
xTool D1 (Pro) Cable Pusher
Order a print of this model
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
A little something to help keep the laser cable and optional Air Assist hose down.
- Rating
- 0 / 5
- Likes
- 28
- Downloads
- 172
- Makes
- 1
- Views
- 1,244
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Tools
- License
- Creative Commons — Attribution — Noncommercial
Prevents the laser cable and optional Air Assist hose from rubbing against the top of your enclosure if you use the xTool risers (or my designed honeycomb centers & risers). Or just to keep them out of the way… Perfect and tested fit on the IR and 20W (5W or 10W unknown as I don't own these, so you'll just have to try it out). You need to replace the 2 x m3 bolts currently on the top back side of the laser with slightly longer ones (30mm works).