1 / 2
Electronics/Battery tray for Gspeed v4 chassis
Order a print of this model
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Tray that screws onto the Gspeed v4 rails to carry a battery or electronics or whatever you choose to put there.
- Rating
- 0 / 5
- Likes
- 7
- Downloads
- 98
- Makes
- 0
- Views
- 572
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- RC & Robotics
- License
- Creative Commons — Public Domain
Battery tray for RC crawler based on the Gspeed v4 chassis
Tray is 62mm long ix 66.5 mm wide and has 4 mm holes on each side to put in brass heat set inserts for M4 screws. Hole spacing on the sides of the tray lines up with the holes in the chassis.
I have mine mounted with a treal capra axle with axle mounted 3 brothers G13 servo and the clearance is good front and back even at full suspension compression
Also acts as a good brace to stiffen the chassis