10 inch server rack 100 mm
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
This is 100 mm depth version with reduction parts.
- Rating
- 4 / 5
- Likes
- 57
- Downloads
- 244
- Makes
- 1
- Views
- 4,046
- Reviews
- 1
Updated at source:
Model information
- Source
- Printables
- Category
- Organizers
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
This is 100 mm depth version of printed 10 inch server rack designed for printer with plate 250 mm x 200 mm (Prusa MK3), but some parts (rails) need the bigger one (Prusa XL).
Rack has standard sizes, see https://en.wikipedia.org/wiki/19-inch_rack
Rails can be stacked on top of each other. You don't need lines or heads, but each rail starts and ends with half U, and you can download them from origin model.
Shelves can be oriented up or down, but filled shelves are perforated (reinforced) from one side, so be careful about that.
There are two groups of shelves:
- with and without front-end panel
- with and without supports, which you can do in slicer if you want
I use standard M6x16 screw with M6 nuts.