Universal shelf for small items
We calculate the final price from your selected file. You review and accept it before payment.
Estimated printing price per file
€1.09 – €1.33 net (excluding VAT)
For file: stojka vint 2.gcode
This is an estimate for one file. You’ll confirm the exact price before ordering.
File and estimate settings
File used for this estimate
Average indicative estimate: €1.21 excluding VAT (range midpoint).
- Weight reported by the author
- 9 g
- Print time reported by the author
- 1.5 hr
- Source material
- PLA
- Estimate material
- PLA
- Estimate printer
- Bambu Lab P1S - 0.4 nozzle
- Estimate process
- 0.20mm Standard
Indicative estimate for the selected file only, based on the author’s weight and print time. File variants are not added together. The final price is calculated after file analysis.
Saved on this device.
this set allows you to make a shelf for a table or hang it on a wall or a panel on the wall
- Rating
- 0 / 5
- Likes
- 18
- Downloads
- 81
- Makes
- 0
- Views
- 471
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Accessories
- License
- Creative Commons — Attribution — Noncommercial
description
I revised the shelf for small things, I decided that it can be hung on a vertical surface such as a wall or pegboard.
For installation on a table, it is enough to print without suspension.
assembly
1. We screw the racks to the shelf with the lower supports.
2. If a shelf of two shelves is required and the shelf will stand on the table, then we lay the next shelf on top and fix it with the top nut, if more shelves are needed, screw on more racks, lay another shelf and fix it with the top nut.
3. When mounting on a wall, right and left suspensions are required under the last shoe. Depending on how you want to mount it on the wall, orient the top and bottom of the suspensions.
note
Racks are designed for printing without supports, after printing it is necessary to break the lower part, this is 5mm, marked with an arrow.
Thread on parts M8. It is desirable to correct it with a tap and a die for cutting threads.
I look forward to feedback and comments.