1 / 5
XL4015 CC CV buck converter case
Order a print of this model
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Remixed XL4015 CC CV buck converter case from ExtremeExtruder
- Rating
- 5 / 5
- Likes
- 34
- Downloads
- 430
- Makes
- 1
- Views
- 1,240
- Reviews
- 1
Updated at source:
Model information
- Source
- Printables
- Category
- Electronics
- License
- Creative Commons — Attribution
2025/10/17 v4.0 Update:
- Make the ridges on the cap smaller so it would close shut without bulging.
-----------------------------
2024/10/09 v3.0 Update:
- Add ridges to the cap so it won't pop out.
- Enlarge trim-pot holes and merge them together for larger tolerance
- Added label (might be a bit small, but was legible on my printer.)
-----------------------------
Remixed ExtremeExtruder's case from scratch based on his design.
- Lid with holes for adjusting current, voltage as well as openings for screwing input/ output wires
- Make the case smaller because the original from ExtremeExtruder are perfect length-wise but have quite a lot of empty space with the width, at least with the board I have.
- Added 4x2mm holes for fixing the board in place. Need 2mm screw which are quite rare so if you don't have them just skip it.