xylo - kinetic sculpture
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
print in place kinetic sculpture
- Rating
- 5 / 5
- Likes
- 36
- Downloads
- 132
- Makes
- 3
- Views
- 2,201
- Reviews
- 2
Updated at source:
Model information
- Source
- Printables
- Category
- Sculptures
- License
- GNU General Public License v3.0
TL;DR
A print in place kinetic sculpture, no tools, no glue, no assembly at all, just print and play.
Collection
Motivation
The idea to create a “print in place” kinetic model. Most models i found needed to be assembled but i like the idea of print in place very much, so i made this one.
This is a great Trophy for anything.
Use the hex baseplate to add text with prusaslicer.
Let's get started
If in doubt print the harp 120 bridging test first. We need to bridge nearly 50 mm. Doing this less than 10 minutes test before wasting filament and hours of printing time is always a good idea. While that works well you can print any of the 3 versions. The differences between the versions is the distance, the freedom, the tolerance between the rotating sticks. Some filament needs more than others.
Attribution
The inspiration for this sculpture was the woodwork of Davic C. Roy in 1975.
Can I sell copies of this?
Yes! Yahbluez shared this project under the GNU GPL v3.0 license. This license allows selling copies, but you must provide proper attribution and use the GPL 3.0 license, as detailed in the GPL v3.0 license itself. You have not the right to use any other licence than GNU GPL 3.0.
Donation
If you like to donate you can buy me a coffee
Filament used
PLA rainbow silk