Voron 2.4/Trident exhaust adapter for machine close to wall
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
I wanted to use the exhaust port of my Voron 2.4 but the counter top I put my printer isn't deep enough.
- Rating
- 5 / 5
- Likes
- 47
- Downloads
- 205
- Makes
- 2
- Views
- 1,295
- Reviews
- 2
Updated at source:
Model information
- Source
- Printables
- Category
- Voron Parts & Upgrades
- License
- GNU General Public License v3.0
I wanted to use the exhaust port of my Voron 2.4 but the counter top I put my printer isn't deep enough. The stock port has a fan attach to the HEPA filter housing then the adapter pokes out quite a bit. That doesn't leave enough room to attach a hose and vent out ABS fumes to a 2 inch hole I drilled on my wall.
I designed this adapter to not poking out but rather point directly down (or you can turn it left or right) so a kitchen drain hose or washing machine drain hose can be used. The outer diameter of the hose I use is 42mm but I included a STEP file if you need to make some changes to fit the hose you can find in your area.
Usually you'd put a fan in between the HEPA filter housing and the adapter but I don't have the fan that fits so I use a different fan and put it outside to pull the air out.