1 / 3
Voron 0.1 foot with integrated holder for TriangleLabs filament sensor
Order a print of this model
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Replaces the rear right foot on a Voron 0.1 to be able to attach a TriangleLabs filament sensor.
- Rating
- 0 / 5
- Likes
- 2
- Downloads
- 12
- Makes
- 0
- Views
- 450
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Voron Parts & Upgrades
- License
- Creative Commons — Attribution
I wanted to add a filament runout sensor to my Voron 0.1. This solution replaces the rear right foot for one that has an attachment for a TriangleLabs filament runout sensor.
This requires some additional hardware:
- 2x m3x4mm heatset insert
- 2x m3 bolts of suitable length
- 1x PC4-M6 connector in order to keep the PTFE tube in place
- An optional short additional piece on the inlet side in order to guide filament from the spool.
Assembly should be straightforward:
- Remove the old foot, saving the bolt and the rubber pad
- Install heatset inserts like in other Voron parts
- Screw in the PC4-M6 connector (it self threads, you may need to use some pliers to get it fully seated)
- Install the sensor into the holder
- Affix sensor with short M3 bolts
- Install the new holder with the longer M3 bolt that is first threaded through the rubber pad. It needs to be fairly snug
- Connect the sensor cable to the sensor and plug it into a suitable place on your controller
Recommend to use a short piece of PTFE tubing in order to guide filament from the spool into the sensor. This length of PTFE is just a friction fit.
I printed this in KVP Stellar Blue ABS on a Voron V0.