1 / 5
12864 LCD case — image 1
1 / 5

12864 LCD case

Order a print of this model

We calculate the final price from your selected file. You review and accept it before payment.

Saved on this device.

Another 12864 LCD case, screws together using M3 screws and hex nuts. No threaded brass inserts needed.

Rating
5 / 5
Likes
5
Downloads
65
Makes
1
Views
509
Reviews
1

Updated at source:

Model information

License
Creative Commons — Attribution

Why this instead of using other existing 12864 case models:
* I didn't have any threaded brass inserts, and didn't want to wait until they arrive.
* I don't like threading screws into plastic.
* Some of the existing models are made with certain mounting position or 30x30 profiles in mind, that didn't fit with space I had available.

Why choose other models:
* you can find existing model with mounting bracket that better fits your needs
* there are smaller more optimized cases
* This model isn't fully optimized and fine tuned and some of the gaps are quite generous.  I designed it so that it would fit together with the first iteration, without having to make more versions with adjustments.
* you don't like the look of screwheads on the top surface (especially non countersunk)
* there are other models which are perfectly support free

Features:
* assembles using hex nuts
* SD card hole
* directly pushable reset button, no separate part for button cover or part relying on flexing of material 
* back contains a bunch mounting holes that can be used for either attaching the case directly to aluminum profile (with T nuts), or additional mounting bracket (no mounting brackets included with this model)
* includes original design file for easier editing

Required hardware:
* 4x M3x16 
* 4x M3 hex nut
* other  hardware of your choice for attaching to printer

Printing tips:
* printing without support is possible, but the holes for hex nuts will make a little bit of mess before the bridges randomly succeed. I forgot to add supports and for the first bridging layers it looked like it will be a failure, but it turned out fine.

Ideas for improvement if you decide to modify provided files
* The gap between top and bottom parts could be smaller.
* Distance between top and bottom surface is 16.6 mm, making the M16 screw slightly to short. Might loose a little bit more due to surface roughness. It still works but is not ideal.
* Top surface could be thinner, it's currently 2mm, but 1.5 just like back should be more than enough thus saving material.  That would also make the M3x16 screws fit better.
* replace mounting holes with M4 or whatever is more convenient for you.

 

Tags