Capra Headband v2
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
A more durable and compatible version of the v1
- Rating
- 5 / 5
- Likes
- 71
- Downloads
- 833
- Makes
- 6
- Views
- 6,001
- Reviews
- 3
Updated at source:
Model information
- Source
- Printables
- Category
- Audio
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
This is a potentially universal solution for headband replacements, I am actively seeking out more headphones to adapt to this design. Right now the HD6x0 series of headphones, the Aurorus Borealis and Australis, and my original designs the Satyr 1 and the CA800/CA800S
This Design Currently only requires 4 M3x16 FHSC screws. The yokes for these will be on different posts linked as remixes.
Reviews:
https://www.reddit.com/r/headphones/comments/11v3sks/capra_headband_mod_for_aurorus_borealis_and/
Print the Adjustment Arms in PETG or Nylon for maximum durability, ASA/ABS and PLA tend to break after a few weeks of use.
Printing the Strap:
Must be printed in 95a TPU. 
Select the center section and change the per model settings to the ones below. The thicker your infil line width + the denser your mesh the stiffer the band will be. I dont recommend going any thinner than .4mm at 15% 
To assemble the headband follow the following instructions
https://github.com/CapraAudio/CapraHeadband/tree/main/
Additional Affiliate Links if you want to support us further:
Polymaker 95a TPU
Polymaker PLA Pro
Polymaker PETG