Graef CM800 Advanced portafilter holder with splash guard
We calculate the final price from your selected file. You review and accept it before payment.
Estimated printing price per file
€2.29 – €2.80 net (excluding VAT)
For file: Graef-CM800-Halter-splash-guard_0.15mm_PLA_MINI_3h1m.gcode
This is an estimate for one file. You’ll confirm the exact price before ordering.
File and estimate settings
File used for this estimate
Average indicative estimate: €2.55 excluding VAT (range midpoint).
- Weight reported by the author
- 22 g
- Print time reported by the author
- 3.02 hr
- Source material
- PLA
- Estimate material
- PLA
- Estimate printer
- Bambu Lab P1S - 0.4 nozzle
- Estimate process
- 0.20mm Standard
Indicative estimate for the selected file only, based on the author’s weight and print time. File variants are not added together. The final price is calculated after file analysis.
Saved on this device.
This is the model of the Graef CM800 coffee mill with an extra splash guard.
- Rating
- 5 / 5
- Likes
- 13
- Downloads
- 107
- Makes
- 1
- Views
- 738
- Reviews
- 1
Updated at source:
Model information
- Source
- Printables
- Category
- Kitchen
- License
- Creative Commons — Attribution — Noncommercial
I remodel the original part in solidworks and added a vertical splash guard. This prevents the coffee powder from splashing over the portafilter.
If you only need the main holder you can download the solidworks file and remove the splash guard.
For printing i used 15% infill. Maybe you can remove more support, but the uploaded gcode works fine and you will not see any surface where support has been attached.
If you like the model you can buy me a coffee. :)