Phone Stand
We calculate the final price from your selected file. You review and accept it before payment.
Estimated printing price per file
€5.38 – €6.57 net (excluding VAT)
For file: Phone_Stand_v6_0.4n_0.2mm_PLA_MK4_6h15m.gcode
This is an estimate for one file. You’ll confirm the exact price before ordering.
File and estimate settings
File used for this estimate
Average indicative estimate: €5.97 excluding VAT (range midpoint).
- Weight reported by the author
- 69 g
- Print time reported by the author
- 6.25 hr
- Source material
- PLA
- Estimate material
- PLA
- Estimate printer
- Bambu Lab P1S - 0.4 nozzle
- Estimate process
- 0.20mm Standard
Indicative estimate for the selected file only, based on the author’s weight and print time. File variants are not added together. The final price is calculated after file analysis.
Saved on this device.
Ridiculously over-engineered printed-in-place no support no brim adjustable tilting phone stand
- Rating
- 4.789 / 5
- Likes
- 1,360
- Downloads
- 12,536
- Makes
- 147
- Views
- 40,814
- Reviews
- 123
Updated at source:
Model information
- Source
- Printables
- Category
- Portable Devices
- License
- Creative Commons — Attribution — Noncommercial — NoDerivatives
Ridiculously over-engineered printed-in-place no support no brim adjustable tilting phone stand. I like to design things and i also like to challenge myself ! So one thing leads to another even if the design is complete madness ;-)
Be advised, this model is not easy to print
- Consider this model as a torture test for you printer, filament profile and your skills
- Note that this model can be resized for easier printing, try 120% for example
- You may also consider trying this simpler and easier to print resizable Phone Stand
If you liked this model and want to help me by supporting my hobby
- Dont’t forget to post your make on Printables and/or Social Media
- You may also look into my store for my Improved Phone Stand
Features
- Stand is suitable for a 14mm thick phone
- Notch for a 2.6mm phone charger cable
- Inclination of the stand is adjustable
- Slide Out to adjust / Slide In to lock
- Integrated locking mechanism
- Resizable at least to 120%
- Print in place
- No Support
- No Brim
Print Instructions
- Print the model on it's side (already in the correct position)
- Use Default 0.20mm QUALITY Prusa Slicer Print Settings
- Filament : PLA or PETG
- Recommended custom settings
- Paint-on Seam : Highly Recommended
- Avoid crossing perimeter
- Infill : Gyroid 15~20%
- Perimeters : 2~3
- Support : No
- Brim : No