Jewelry Stand for Earrings
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
A simple holder for earrings with maximum usage of space
- Rating
- 4.5 / 5
- Likes
- 353
- Downloads
- 1,162
- Makes
- 5
- Views
- 8,201
- Reviews
- 6
Updated at source:
Model information
- Source
- Printables
- Category
- Organizers
- License
- Creative Commons — Attribution — Share Alike
A minimalistic stand for earrings with lots of storage for studs and hangers.
This jewelry stand for necklaces was printed on the prusa mini which limited the dimensions to 178 mm in height and width. Feel free to modify those to customize it for the length of your necklaces.
There are two options for the display part, the ‘middle’ option has the tongue centered and needs supports to be printed. The ‘side’ option has the tongue put to one side so the actual display lays flat on the printbed, no supports are needed.
There are two options for the foot of the stand, one with the groove is either in the middle or to the side. Both work equally well, with the one to the side the supports are easier to get out while the one to the middle looks a bit better in my opinion. Since they are the same size, they are interchangeable with the stands themselves and can be chosen for the preferred look.