Guitar Pick Holder for Honeycomb Storage Wall
We calculate the final price from your selected file. You review and accept it before payment.
Estimated printing price per file
€0.36 – €0.45 net (excluding VAT)
For file: GuitarPickHolder_3+1_0.3mm_PLA_MK3S_22m.gcode
This is an estimate for one file. You’ll confirm the exact price before ordering.
File and estimate settings
File used for this estimate
Average indicative estimate: €0.40 excluding VAT (range midpoint).
- Weight reported by the author
- 6 g
- Print time reported by the author
- 21.6 min
- Source material
- PLA
- Estimate material
- PLA
- Estimate printer
- Bambu Lab P1S - 0.4 nozzle
- Estimate process
- 0.20mm Standard
Indicative estimate for the selected file only, based on the author’s weight and print time. File variants are not added together. The final price is calculated after file analysis.
Saved on this device.
This is a holder for guitar picks compatible with the famous Honeycomb storage wall
- Rating
- 5 / 5
- Likes
- 85
- Downloads
- 221
- Makes
- 3
- Views
- 1,160
- Reviews
- 2
Updated at source:
Model information
- Source
- Printables
- Category
- Wall-mounted
- License
- Creative Commons — Attribution
I wanted to have a thing on the honeycomb wall to hold my guitar picks, so I made this simple model.
I made two variations of it, one holds 5 normal picks, and the other one holds 3 normal picks and a chunky one. The model files are named appropriately, I included both .stl and .3mf file types and the gcodes my slicer generated. I printed it upside down so the top is textured, but it really doesn't matter that much.
As for the dimensions, the hole for the picks is 1.5mm, and 3.5mm for the chunky one. The gap between the picks is 2.5mm. The height is approx. 13mm, the part that gets plugged into the empty wall insert is 13mm long.
I'll try and make more versions, so if you have any suggestions, feel free to tell me. Also, you can make your own versions of it, but don't forget to mention the creator of the Honeycomb storage wall, and me:)