Straw Truncated Icosahedron Connector
We calculate the final price from your selected file. You review and accept it before payment.
Estimated printing price per file
€0.12 – €0.15 net (excluding VAT)
For file: truncated-icosahedron-connector_0.6n_0.2mm_PLA_MK3S_10m.gcode
This is an estimate for one file. You’ll confirm the exact price before ordering.
File and estimate settings
File used for this estimate
Average indicative estimate: €0.14 excluding VAT (range midpoint).
- Weight reported by the author
- 1 g
- Print time reported by the author
- 10.2 min
- Source material
- PLA
- Estimate material
- PLA
- Estimate printer
- Bambu Lab P1S - 0.4 nozzle
- Estimate process
- 0.20mm Standard
Indicative estimate for the selected file only, based on the author’s weight and print time. File variants are not added together. The final price is calculated after file analysis.
Saved on this device.
A connector for making a truncated icosahedron out of straws.
- Rating
- 0 / 5
- Likes
- 21
- Downloads
- 106
- Makes
- 0
- Views
- 525
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Math
- License
- Creative Commons — Public Domain
A connector for making a truncated icosahedron out of straws.
The two sockets with flat bottoms are 108° from each other and form the outside of one of the solid's 12 pentagons. All pentagon edges are connected via one of these two sockets, while some hexagon edges are connected by the third socket. Also, any edge that originates in a third socket also terminates in a third socket.