1 / 2
L298D Motor Driver Mouning Plate
Order a print of this model
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
This is a mounting plate for the dual motors driver board that uses a L298D. They are widely available.
- Rating
- 0 / 5
- Likes
- 5
- Downloads
- 95
- Makes
- 0
- Views
- 458
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Electronics
- License
- Creative Commons — Attribution — Noncommercial
This is a mounting plate for the dual motor driver board that uses a L298D. They are widely available. This mounting plate serves three purposes:
- act as a spacer between the mounting surface and the board (4 mm)
- prevent scratching the mounting surface
- prevent short-circuiting the board component pins if the mounting surface is metallic.
The mounting holes are 3 mm in diameter. They are pass-tru holes. They are 36.75 mm apart. The mounting plate is 43.3333 mm x 43.3333 mm. The overall height of the mounting plate is 4 mm.
Print Settings
Supports: No
Infill: 25%