SOVOL SV06 (SV-06) Filament Guide (PC4-M10 Pneumatic Fitting)
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
A simple filament guide that ensures a clear path to the extruder using a PC4-M10 fitting and a small length of PTFE.
- Rating
- 4.5 / 5
- Likes
- 30
- Downloads
- 192
- Makes
- 2
- Views
- 1,036
- Reviews
- 2
Updated at source:
Model information
- Source
- Printables
- Category
- Other Printer Parts & Upgrades
- License
- Creative Commons — Attribution — Noncommercial
This is a remix of ub3rmario's Sovol SV06 Minimal Filament Guide model.
It's the same basic idea but instead of leaving the filament to move from side to side in the original filament guide this approach incorporates a PC4-M10 fitting and a small piece of PTFE tubing to ensure a smooth path to the extruder.
The hole for for the fitting is pre-threaded so securing it in place by hand is recommended, take care not to cross thread into the plastic.
You'll need this print, a PC4-M10 fitting with a collar lock, and a small piece of PTFE tubing 50mm to 60mm in length.
Printed in gloss black SUNLU PLA
.2mm Layer Hight
30% Infill
.6mm Nozzle
Nozzle Temp - 200c
Bed Temp 60c