Dassault Rafale M
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
1:100 model of a Dassault Rafale M
- Rating
- 5 / 5
- Likes
- 78
- Downloads
- 952
- Makes
- 7
- Views
- 2,757
- Reviews
- 4
Updated at source:
Model information
- Source
- Printables
- Category
- Vehicles
- License
- Creative Commons — Attribution — Noncommercial
My Cura settings (settings with * are ones I've found to have a large effect on the quality of the print)
Hatchbox Light Grey PLA
*Temperature: 200 C
Build plate temperature: 60 C
*Layer height: 0.09 mm
Line width: 0.4 mm
*Support line width: 0.3 mm (thinner support line width makes support easier to remove)
*Support interface line width: 0.3 mm
Walls count: 4
*Z seam alignment: sharpest corner
*Seam corner preference: smart hiding
Top/Bottom layers: 6
Infill: 10%
Speed: 45 mm/s
Retraction: 0.4 mm
Combing: not in skin
Support density: 8%
*Support Z distance: 0.18 mm
*Support interface density: 80%
Adhesion: Raft