Replacement part – Saeco Xelsis milk hose clip
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Replace a broken handling and securing clip for your milk hose on Philips Saeco Xelsis.
- Rating
- 5 / 5
- Likes
- 8
- Downloads
- 60
- Makes
- 2
- Views
- 523
- Reviews
- 2
Updated at source:
Model information
- Source
- Printables
- Category
- Kitchen
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
The Idea
During my monthly cleaning of our coffee machine, Philips Saeco Xelsis, the clip to secure the milk hose to the metal pipe broke. A quick redesign of the litte plastic clip solved the problem.
Print instructions
A small part with just a little bit of contact area. Therefore I used a brim of 3mm and supports for the little handling knob. Since the hose might get hot you might consider using a more heat resistant material. My prototype was made of PLA and so far it resists the temperature rises during the “hygie-steam”-cleaning process.
| Material | PLA / better PETG or ABS/ASA |
| Layer hight | 0,2mm |
| Nozzle | 0,4mm |
| Perimeters | 2 |
| Infill | 15% |
| Specials | Brim 3mm, Supports |
👍LIKE👍 + 💬SHARE💬 + ⚒post your MAKE🛠
Please leave a like and share your experience with this design. Let me know if I can improve on it and redesign it. There is always a better version. Also show us your make!
Also see my other designs: https://www.printables.com/de/social/219075-md3d/models
Histroy
Highest version number is the most recent.
| V1 | 22.03.2023 | Upload first public version |