1 / 5
Mini StealthBurner Orbiter mount
Order a print of this model
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
This approach is based on bowden toolhead. Orbiter is mounted using two heat inserts. Use original hotend adapters.
- Rating
- 5 / 5
- Likes
- 91
- Downloads
- 578
- Makes
- 4
- Views
- 3,911
- Reviews
- 2
Updated at source:
Model information
- Source
- Printables
- Category
- Other Printer Parts & Upgrades
- License
- GNU General Public License v2.0
Other than prints, You will need:
- 1x M3x20 - to secure toolhead from behind (not present in V0 BOM, but Trident and V2.4 have them, so You might have some laying around)
- 2x M3x8 - to secure Orbiter V2.0
- 30,2 cm bowden tube, between orbiter and toolhead (Measured on Dragon Hotend)
- 1x M3 nut
- 2x typical Voron heat inserts - M3xD5xL4
Graphs aren't actually fair, since I was using 17mm motor for Mini StealthBurner, whereas Orbiter uses 20mm one.
Also: wight balance is almost perfect, the same as Mini SB.