Phone Stand Holder Seamless : print on side
We calculate the final price from your selected file. You review and accept it before payment.
Estimated printing price per file
€1.63 – €1.99 net (excluding VAT)
For file: phoneholder_03mm_pla_mk3_1h28m_ontherightlowera.gcode
This is an estimate for one file. You’ll confirm the exact price before ordering.
File and estimate settings
File used for this estimate
Average indicative estimate: €1.81 excluding VAT (range midpoint).
- Weight reported by the author
- 30 g
- Print time reported by the author
- 1.46 hr
- Source material
- PLA
- Estimate material
- PLA
- Estimate printer
- Bambu Lab P1S - 0.4 nozzle
- Estimate process
- 0.20mm Standard
Indicative estimate for the selected file only, based on the author’s weight and print time. File variants are not added together. The final price is calculated after file analysis.
Saved on this device.
A seamless phone/ipad stand. It takes 1 h 30 min to print. No overhang, NO sharp edges, No support, YES YES YES.
- Rating
- 4.938 / 5
- Likes
- 253
- Downloads
- 3,621
- Makes
- 67
- Views
- 9,313
- Reviews
- 65
Updated at source:
Model information
- Source
- Printables
- Category
- Portable Devices
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
A seamless phone/ipad stand. It takes 1 h 30 min to print. No overhang, NO sharp edges, No support, YES YES YES.
More stands with various logo can be found in my other models, e.g.,
https://www.printables.com/model/114531-phone-stand-with-rose-logo-valentine-day
with rose, cube, hearthstone, basketball…
Inspired by https://www.thingiverse.com/thing:1464340 and redesign using Fusion 360.
Here, I round all the edges in the redesign that will be safe for my 2 years old son. Most importantly, I design it in a way that the holder can print on the side, so that there is no more overhang issue at all and the beautiful curvature in the design can be achieved nicely in the print.
PhoneHolderV2_PrintableOntheside.stl
Use this for printing and print as it is.
PhoneHolderV2_forModification.stl
This is for the purpose of modification.
Just in case you want to add a logo on the back of the stand. The angle of two plates are 40°
Print instructions
It can be also printed in Vase mode.