1 / 6
Prusa i3 Metal Frame Filament Guide Revisited
Order a print of this model
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
This is a second iteration of https://www.prusaprinters.org/prints/43072-prusa-i3-metal-frame-filament-guide .
- Rating
- 0 / 5
- Likes
- 0
- Downloads
- 9
- Makes
- 0
- Views
- 147
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Prusa Parts & Upgrades
- License
- Creative Commons — Attribution — Noncommercial
This is a second iteration of https://www.prusaprinters.org/prints/43072-prusa-i3-metal-frame-filament-guide . The loops for the filament are larger and thinner. Depending on the feed angle of the filament, the first iteration was sometimes restricting the filament movement.
Furthermore, there are four files: two for a dual extruder and two for a single extruder printer. Each group has a 6.5 mm and a 7 mm grip width. Depending on the material, the 6.5 mm version is sometimes a bit too tight.