Toilet paper holder (glued on)
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
A simple toilet paper holder designed to be glued onto the tiles.
- Rating
- 0 / 5
- Likes
- 4
- Downloads
- 73
- Makes
- 0
- Views
- 258
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Bathroom
- License
- Creative Commons — Attribution
Here's yet another toilet paper holder for you! I know there are plenty designs already, but when I was looking for it there was no single model that I would like visually, so decided to create my own.
This one has no special mounting, it's designed to be glued on a tiled wall, bathroom cabinet, shower glass wall, etc. Glue it using a strong double sided tape or silicone sealant. I prefer silicone, because it's really solid and if you ever need to remove it you can just use a spatula/scraper (i.e. one that you use for your 3d printer) to basically “cut” it off the wall and the clean the silicone remains with a remover.
No special printing requirements, 0.4mm nozzle with 0.2mm layer height and 3-4 perimeters will be enough. 20% infill will do, use 40% if you'd like it to be a bit more rigid. No supports should be required, but use some cooling to get a nice finish on the top overhang (the one that prevents paper to fall out). I used PETG, but PLA should hold up well too.
Enjoy!