1 / 6
Ankermake M5 Marlin board fan mount for Noctua 40mm fan — image 1
1 / 6

Ankermake M5 Marlin board fan mount for Noctua 40mm fan

Order a print of this model

We calculate the final price from your selected file. You review and accept it before payment.

Saved on this device.

Converter for the 30mm Marlin board fan mount to support a Noctua 40mmx10mm fan.

Rating
5 / 5
Likes
41
Downloads
246
Makes
4
Views
1,979
Reviews
4

Updated at source:

Model information

License
Creative Commons — Attribution — Share Alike

EDIT: Noctua now makes a 24V version of this fan.  You can use the 24V version and simply use this mount and plug the fan in to the existing fan connector without following any of the tasks below.  I am leaving the original instructions below in case someone still needs to use the 5V version.

Noctua NF-A4x10 24V 40x10mm fan: https://www.amazon.com/Noctua-NF-A4x10-24V-PWM-Applications/dp/B0CN39MCPL

---

This task is moderately difficult and not plug and play.  Please read and understand what is needed before jumping in to it.  You can contact me on the Ankermake discord if you have any questions.

You will need to do a little modification to the adapter cable to be able to plug the fan in to an alternate spot on the board.  Noctua does not make a 24V fan so do NOT use the existing fan plug on the board.  You will need to purchase the 5V version (not the 12V version!) and plug it in to an alternate connector on the board that supplies +5VDC.  This fan has almost the exact same amount of airflow as the original 30mm fan however it is basically silent.

Items Needed: Noctua NF-A4x10 5V 40x10mm fan: https://www.amazon.com/gp/product/B00NEMGCIA

(2) M3x6mm or shorter screws.

(1) JST-XH Connector 2.54mm 3 Pin Male Plug.   You will not be able to purchase a single connector, you will need to find one somewhere or purchase a kit or lot of them from amazon or an electronics retailer.

You will need to print the mount and attach it to the fan as shown, then screw the mount to the original two holes that held the OEM 30mm fan to the heatsink, by inserting a hex tool between the blades of the fan and tightening the screws down.

Attach the mount to the fan by using the 4 screws that come with the fan.  To attach the mount to the heatsink you will need to use alternate screws.  The ones that were originally on the fan are far too long now that they are not going through the fan.  They are M3 screws and will need to be between 3mm-6mm long.

The fan includes a 3 pin to 2 pin adapter.  We will be using this adapter, however it must be modified to plug in to the alternate 5V port on the board.  Do NOT attempt to use this adapter and plug it directly in to the fan port on the board or the fan will be exposed to extreme overvoltage which could result in fire or injury.

You will need to de-pin the 2 pin connector on the cable and re insert the pins in to JST-XH 3 pin connector that you have obtained separately.  You can find guides on the internet that will assist you in this.   Cliff notes version: Use a very small flathead screwdriver (eyeglass size) and push down on the pins between the grooves in the top of the connector. Once they have been depressed the pins will slide out of the connector.   Take a razer blade and gently lift the pins back up.  They can now be inserted in to your new connector.   Please find a guide with photos on de pinning and re pinning JST connectors if you are unsure of exactly what to do here.

Ensure the black cable is going in the middle connector and the red cable is on the right side.  Please see the photo I have attached for proper orientation.  The wires will crossed vs how they were originally.  In my photos the cables are not yet fully seated for illustration purposes.  

You can now plug the new converter cable in to the fan and attach it to the board on the connector labeled Z1.  See my photo to verify the proper connector.

I suggest now plugging the printer in and turning it on to verify the fan is operating properly.  The fan should start running as soon as power is applied and remain running constantly.