1 / 4
ALTERA Cyclone II FPGA Development Board Mounting and Drilling Plates
Order a print of this model
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
This thing contains a mounting plate and a drilling guide for the “ALTERA Cyclone II FPGA Development Board”.
- Rating
- 0 / 5
- Likes
- 3
- Downloads
- 10
- Makes
- 0
- Views
- 272
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Electronics
- License
- Creative Commons — Attribution — Noncommercial
This thing contains a mounting plate and a drilling guide for the “ALTERA Cyclone II FPGA Development Board”.
The baseplate is 1.5 mm thick. M2 5 mm or 1/4″ 4-40 screws are needed to fasten the board to the mounting plate. The mounting holes are three mm in diameter.
The holes do not go through the lower layer to make it easier to print. You will have to drill them.