Jig for trimming screws to fit Improved Wandering Hour Clock
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Jig to help quickly trim screws to length for the Improved Wandering Hour Clock
- Rating
- 0 / 5
- Likes
- 1
- Downloads
- 22
- Makes
- 0
- Views
- 174
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Tools
- License
- GNU General Public License v3.0
If like me you are trying to make the Improved Wandering Hour Clock but don't have all the screws matching the correct length, this jig will align longer screws so they can be trimmed to size. Bear in mind that cutting small steel screws will make them quite hot and put sideways strain on the holes, so print the part using a material that has a reasonably high melting point (I used PETG) and when you are trimming the screws down, go slowly.
Screw the screws in from the uneven side, until the screw heads touch the jig (see first photo). Then turn over (see second photo) and file, cut or otherwise machine the screw threads to be level with the flat side (see third photo). This will give you 14x M3x6mm, 3x M3x4mm, 1x M3x8mm and 3x M3x16mm, exactly as required.