1 / 2
Sunlu 3D Filament Dryer Box S1 Guide Remix
Order a print of this model
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Sunlu 3D filament dryer Guide to aid in smooth movement of filament when the dryer is placed above the printer.
- Rating
- 5 / 5
- Likes
- 6
- Downloads
- 35
- Makes
- 1
- Views
- 636
- Reviews
- 1
Updated at source:
Model information
- Source
- Printables
- Category
- Accessories
- License
- Creative Commons — Attribution
This remix of the original adds the following:
- Filled in back plate
- Screw holes that are counter-sunk
To get more information on print details, visit the original designers page.
Installation Parts:
- 2 Bolts - M3x12 (I used M3x16 for mine because it's what I had)
- 2 Nuts - M3
- 2 washers - M3 (anything about twice the size of the head)
Installing:
- Using the Sunlu Slot as a guide, place it and mark the drill holes with a sharpie.
- Using a 3/32" drill bit (it's a perfect size) drill both holes.
- Screw in a bolt into each hole to create the threads in the plastic, then back out the screw.
- Now install the Sunlu Slot with both bolts, place the washers and tighten down the nuts.