1 / 2
Cake Pop Bouquet / Holder
Order a print of this model
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Stand to hold cake pops while the frosting is cooling. Can also be used to display them as a bouquet or give as a gift.
- Rating
- 0 / 5
- Likes
- 18
- Downloads
- 132
- Makes
- 0
- Views
- 658
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Kitchen
- License
- Creative Commons — Attribution — Share Alike
Designed for 0.15 inch (4mm) diameter by 6" long cake pop sticks. The holes are nominally 4.5mm diameter, but they printed undersized for me, about 4.2mm.
If you have to drill the holes out, you might want to print with more perimeters, otherwise you might drill into the infill.
The cake pops could have been much bigger and still fit with plenty of clearance, but the spacing between them made it much easier to get them in their holes without interfering with each other