1 / 4
BOSCH GWS13-50VSP Plug-It adapter
Order a print of this model
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Adapter to connect Festool Plugit power cable to BOSCH GWS13-50VSP Grinder
- Rating
- 0 / 5
- Likes
- 5
- Downloads
- 35
- Makes
- 0
- Views
- 691
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Tools
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
Replace the cable with a plugit adapter. The change is reversible.
Needed:
- Festool replacement part # 491996 (High power version, from the Festool Router OF1440, since the grinder can draw 13 amps)
- two #6-32 x ½'' machine screws
To install:
- Open the 2 housing sides, remove paddle
- Mark which plugit adapter cable replace the black/white cable
- Remove the cable, strain relief and cable clamp
- Install the socket adapter in the part, secure with the machine screws
- Slide the part, secure using the existing clamp screws
- Secure the cables to the terminal blocks. No need to trim, but be careful the extra cables do not empede the paddle lock
- Reinstall paddle and the 2 housing halves.