1 / 6
Whirligig Plane
Order a print of this model
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Just a simple whirligig plane.
- Rating
- 0 / 5
- Likes
- 24
- Downloads
- 68
- Makes
- 1
- Views
- 853
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Other Ideas
- License
- Creative Commons — Public Domain
In addition to the printed parts you will need:
- (2) 6082RS sealed ball bearings
- 5/16-18 x 2" hex bolt
- 5/16 - 18 tap
- 18" x 5/8" OD pipe
I used the bolt with some washers and a hex nut to pull both bearings into the housings.
I used Loctite when installing the propeller bolt.
The pivot pipe was a loose fit but I just glued it in properly.