1 / 13
Sovol SV06 X-twist fix top bar upgrade — image 1
1 / 13

Sovol SV06 X-twist fix top bar upgrade

Order a print of this model

We calculate the final price from your selected file. You review and accept it before payment.

Saved on this device.

This is a modification that will try to eliminate any warp in the Z-axis assembly. In my printer this eliminated X-twist

Rating
5 / 5
Likes
94
Downloads
437
Makes
4
Views
4,303
Reviews
2

Updated at source:

Model information

License
Creative Commons — Attribution — Noncommercial

This is a modification that will try to eliminate any warp in the Z-axis assembly. In my printer this eliminated X-twist. 

X-twist induces a difference between the probe measurement and the nozzle height.
A typical case is shown on the right: the nozzle is too low on one side of the bed



 

This mod consists of three parts:

  • Part 1: square up the towers
  • Part 2: replace Z motor brackets
  • Part 3: replace top bar with extrusion
     

The steps are explained in the pictures or you can also look at the attached pdf.