1 / 6
Relaisgehäuse für Profilschienenmontage am 3D Drucker — image 1
1 / 6

Relaisgehäuse für Profilschienenmontage am 3D Drucker

Order a print of this model

We calculate the final price from your selected file. You review and accept it before payment.

Saved on this device.

Relaisgehäuse für die Montage an 3D Druckern etc. Passt für gängige Doppelrelaiskarten und die neuen Solid State…

Rating
4 / 5
Likes
6
Downloads
61
Makes
1
Views
373
Reviews
1

Updated at source:

Model information

License
Creative Commons — Attribution

Relaisgehäuse für die Montage an 3D Druckern etc.

Passt für gängige Doppelrelaiskarten und die neuen Solid State Relaiskarten.

Bohrungen im Deckel sollten mit der Bohrmaschine aufgebohrt und evtl. gesenkt werden,

je nach verwendeten Schrauben.

Die Schraubenlöcher sind in 2mm konstruiert und können passend aufgebohrt werden.

Die Montageschrauben für die Platine sollten max. 5mm lang sein, damit die Isolation des Gehäuses nicht durchbrochen wird, falls mit höheren Schaltspannungen gearbeitet wird.

-------------------------------------------------------------------------------------------

Relay housing for mounting on 3D printers etc.

Fits common dual relay cards and the new solid state relay cards.

Holes in the lid should be drilled out with a drill and possibly countersunk,

depending on the screws used.

The screw holes are constructed in 2mm and can be drilled to fit.

The mounting screws for the circuit board should be max. 5mm long, so that the insulation of the housing is not broken when working with higher switching voltages.

Category: 3D Printer Parts

Tags