Pigeon Glider
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
The pigeon glider, ideal for use in the city
- Rating
- 0 / 5
- Likes
- 34
- Downloads
- 107
- Makes
- 0
- Views
- 1,143
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Vehicles
- License
- Creative Commons — Attribution
Pigeon Glider
Model inspired by the classic pigeon/bird glider
The original model was built with balsa wood, and that is why this model includes two versions:
-"Classic" version: you can print it in the color you like best, or you can do it in PLA WOOD, if you sand this material very carefully you can achieve a finish similar to that of balsa wood.
*Version "two colors": you can combine the colors that you like best, I chose to combine different gray and white to achieve a similarity with the birds that are most seen in the city.
-Printing instructions:
*"Classic" version: print 2 wings, 2 tails and the body.
*Version "two colors": print 2 wings, 2 tails and 2 bodies, the pieces that you multiply must be mirrored. To combine colors you have to configure the filament change according to the layer height.
-Assembly instructions:
*Classic version: glue both parts of the wing and tail paying special attention to the "dihedral" marked in the image.
*Version "two colors": in addition to gluing both parts of the wing and tail, paying special attention to the "dihedral" mark on the image, we will have to glue both parts of the body.
*In both versions you have to incorporate the fishing line lead in the hole that corresponds to the eye, if it is necessary to enlarge it, you can do it with a cutter (the small lead is usually enough to achieve the necessary counterweight for this model )
-In addition to the printed parts you will need:
*Cyanoacrylate glue (super grlue).
*Lead for fishing lines, of the smallest that come (Photo).
*Ruler
*Sandpaper (in case you want to sand the surface of parts printed with PLA WOOD)